Get A 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: https://vip.learnautobodyandpaint.com/free-autobody-manual
Read the Blog: How To Paint Your Car Like A Pro Even If You’re A Newbie: https://www.learnautobodyandpaint.com/how-to-paint-your-car-like-a-pro-even-if-youre-a-newbie/
The whole goal of prepping before paint is to take out the imperfections like this orange peel. You want it to get matte looking like how I show you in the video. Remember this is not the final grit. We’ll finish it off with 400-grit before we paint.
It’s always good to have clean parts. I sprayed degreaser, hit it with a brush and wash it off. Check out the video as I show you how I use the wax and grease remover on this part.
For every golf ball size of body filler, put 8 drops of hardener. In this example, I put a little more hardener because I want it to harden quickly so we can get things done fast.
As you can see in the video, we’re spraying a good 2-3 heavy coats of Evercoat filler primer on all of our panels. We’ll also do some dry sanding with the use of our DA Sander. Finally, we’ll cut this down with 400-grit wet sand.
You’ll always want to finish by hand because you can feel all the little imperfections and you’ll see exactly how it comes out once it’s painted.
Here’s the Omni Plus. This is a good base coat and it’s about $100 for a quart of paint. Remember, this base coat is a 1:1 mixture with your reducer.
You don’t have to worry about overspray when you’re doing base coat clear coat. It’s not that bad compared to a single-stage enamel paint job. Single-stage enamel paints are very thick.
You can tack between base coat when it’s dry. But, never tack between clear coat.
When spraying your bumper covers, you need to make sure that you’re getting all the areas. You may have to adjust your nozzle from a wide fan to a narrow fan to get into some of these areas.
A lot of times, you’ll see specks of dots in your clear coat. That’s fine because it’s just atomizing on the panel. You might see little bubbles but it disappears after it flows out onto your panel.
You don’t have to be scared of runs when you’re doing clear coat because you can fix it by color sanding and buffing. The only time you have to worry about it is if you’re spraying pearls or flakes in your clear coat. That’s why I really recommend the newbies to just work with clear coats.
Get A 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: https://vip.learnautobodyandpaint.com/free-autobody-manual/
Connect on Facebook for More FREE Updates: https://www.facebook.com/learnautobodyandpaint
Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts
Check Out Our Recommended Gear: https://www.zoolaa.com/
#howtopaintacar #paintcar #autobody