Spraying Primer – Avoid These Mistakes When Spraying Primer on a Car – DIY Auto Body and Paint

Avoid these mistakes when spraying primer on a car. In this video we are spraying epoxy primer and spraying 2K primer surfacer. #epoxyprimer #2Kprimer Learn some mistakes to avoid as DIY Auto Body and Paint demonstrates spraying primer in this video.

Below is the information about the 3M primer gun that I mentioned.

To learn more about the technical data sheet for these primers visit https://www.youtube.com/watch?v=V0KNB1Ar44E&list=PLOmXEqUJYh4l9qd2Vcds4aaiCfBbGMgxj

Information About Mixing Lids and Cups

Are you needing auto washing and detailing supplies? Visit our friends at http://www.CollisionBlast.com/ChemicalGuys

Order your used, aftermarket, or reconditioned parts for your project car at LKQ, the largest automotive supplier. Visit http://www.collisionblast.com/LKQ


Share this video https://youtu.be/x4gwKZsM4PI

Also be sure to subscribe to this #DIYAutoBodyandPaint to stay tuned with upcoming videos every Tuesday at http://www.youtube.com/subscription_center?add_user=butlercollision


Q&A Video Response – https://www.youtube.com/playlist?list=PLFE0C4096959A85C4

Donnie and Jess – https://youtu.be/RO0_SKodbUk?list=PL49vEsY2VV2r7jFcKxDpgE7mpFqFJvfVl

Eastwood Video Series – https://youtu.be/uPgIOHkr0oE?list=PL49vEsY2VV2owacnGOt31FQj6N3e9_ugi

Plastic Repair – https://youtu.be/XrJ7t6KwdNs?list=PL49vEsY2VV2rhmWljJFSJSoUasg7-XzVF

Rust Patch – https://youtu.be/LwTBmRMRkbg?list=PLFE05DAE7CF6FD4CB

Spraying Matte Colors – https://youtu.be/Xc6f1tTam0w?list=PL2E1A50BE4361BB95

Spray Gun Adjustment – https://youtu.be/AY8_2qx4htw?list=PL9D278D201EBFA3B6

Masking Tips – https://www.youtube.com/playlist?list=PL49vEsY2VV2oBmZP4zaJ6D2paLe0VjJoJ

Basic Car Maintenance – https://www.youtube.com/watch?v=TEk7ci92DFY&list=PL9E857813A2D4EC64

Join me on Twitter at http://Twitter.com/DonnieSmith7

Join our Facebook page at http://Facebook.com/CollisionBlast

For free access to DIY auto body and paint training, please subscribe to Collision Blast at http://CollisionBlast.com

Thanks for watching the my videos, and be a resources by sharing the links to the videos with your friends on Facebook and Twitter.

Welcome to DIY Auto Body and Paint. Here you will learn how to repair and paint your car. We’ll teach you things about metal straightening, body filler, plastic repair, sanding, prepping, priming, painting and more. So if you want to learn how to paint a car yourself, then you’ll want to subscribe to this channel.

DIY Auto Body and Paint Youtube channel, which is a part of http://www.CollisionBlast.com. The channel offers auto repair training videos for car enthusiasts, DIY, students, or the professional technician. Regardless of the reason you’re here I believe you will find this channel useful. Subscribe and help share and promote this unique set of skills. We need more exposure, interest, and more people pursuing collision repair as a career.


Our Mission Statement: To inspire and teach others to a spend their time productive doing a hobby that can bring meaning and good memories into their life. This could be to enable an individual with the skills to work on their own car, a father/mother and son/daughter project, or a career in collision repair.

DIY Auto Body and Paint –
The information provided in this video is for educational and informational purposes only and solely as a self-help tool for your own use. It is the responsibility of the viewer to First read the Technical Data Sheet, Material Safety Data Sheet, and any other instructions for each product, tool, or equipment used and to follow the safety recommendations of the manufacture. DIY Auto Body and Paint assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. There are no warranties or guarantees of the results of the viewer after watching this video. The results will vary according to each individual’s talents, knowledge, and skills.

Creative Commons Music Used

Share This:

How To Spray 2K Filler Primer – Do IT Yourself – LIve Lesson Fridays

It’s Live Lesson Fridays On Sunday! My Friend Pete shows us the proper way to use 2K Filler Primer and gives us the low down on Epoxy Primer VS. Filler Primer.. It’s a Lesson You Don’t Want To Pass UP! http://www.swrnc.com or 972-420-1293

Share This:

Automotive Primer Lesson – How To Spray Primer and Final Grit Sanding

Get your Free New A-Z Guide To DIY Auto Body And Paint Success Manual here : https://www.learnautobodyandpaint.com/free-autobody-manual/

Get complete auto body and paint DOMINATION and training here:https://www.learnautobodyandpaint.com/vip-offer/

Read the Blog Here: https://www.learnautobodyandpaint.com/are-you-spraying-primer-spraying-a-filler-primer-over-a-bmw-body-kit/

Hey, it’s Tony. Thanks for watching the video and checking out the blog. Today, we’ll talk about spraying a filler primer over a BMW body kit.

In the video, you can see I’ve prepared mostly everything. All the panels are tacked down and ready to roll.

We have our gun and our filter in it. You always want to filter everything you do. We also have our jar to mix. Remember, your hands are going to be sticky sometimes.

And, we can put back our tack rag and use it when we’re doing our base coat clear coat. We’ll use an area on it that wasn’t used. You can probably do a whole car between your base coat stages before you throw it out.

Watch the video as I show you how to mix it in the jar. I half-filled it with primer (or probably a little less), a quarter of our hardener and we can add some reducer if it looks a little bit too thick.

Make sure to strain everything before you put it in your paint gun. Then, watch the video as I show you how to lay the first coat of paint.

It shouldn’t be too much because you want it to flow on thick and heavy. And, if you spray a thick primer at too much of a high psi, it’s going to come out dry since it will come out so quick.

Please take note of how I spray, how my wrist flows and how I get on to certain areas. I’ll do the front and back kit two to three times.

If you look on to the top left part of the bumper cover where the light goes, you can see a little dry area. That’s the bondo sucking up the primer. You’re going to see these spots all over when you start painting.

It’s good that you notice these spots because you know where the bondo is sucking up the primer so you can cover it.

Here’s a sneak peak of the finished product. This is how it’s going to look once it’s done. When it dries, it should look pretty much like a matte color.

All the imperfections that you see here, like the dust and orange peel, will be sanded out flat. This is our first coat. We’re going to do another coat then we’ll clean our spray gun.

When you clean your gun, just throw some lacquer thinner in it immediately after you paint then mix it up.

You have to repeat the process about two to three times. Then, take cup off, as well as the nozzle tip, and needle then soak it in the little bucket. Soak it for a little while.

Make sure you clean it out really well then put it back together. You don’t have to worry because soaking will not hurt any of the seals.

I have other videos on tips and tricks in cleaning your spray guns within the LearnAutoBodyAndPaint VIP Course. So, if you want to learn more, check it out now.

Don’t forget to grab your FREE 85-Page Auto Body And Paint Manual and get a lot of free information about DIY auto body work.

I hope you liked the video. Please Like, Comment, Share and Subscribe to my videos. Stay tuned for the next video as we assess what we’ve primed and we’ll also talk about glaze putty.

Talk soon! Cheers! Bye!


Get A 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: https://vip.learnautobodyandpaint.com/free-autobody-manual/

Connect on Facebook for More FREE
Updates: https://www.facebook.com/learnautobodyandpaint

Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts

Check Out Our Recommended Gear: https://www.zoolaa.com/

Share This: